Cut diamonds

Cut diamonds  

 

 Without a doubt, in the jewelry business is considered the standard round cut diamonds is that this type of cut is the largest diamond jewelry gives radiance, gloss. Clearly adhered to not only shape and proportions, but the number of faces: 24 — at the bottom of the diamond, and is in the top 33. However, this type of cut is very costly. When processing is lost at least half the weight of a diamond is. The conventional way is certainly more correct, diamonds sparkle and shimmer, everything is thought out to the last detail. But most fancy cut diamonds valued much higher. There is a reason and an unusual form of stone and romantic names. For example, gem diamonds ' Marquis ' or ' Princess '. Moreover, even the same weight of diamonds, cut in novel ways, look more than round. The fact that the raw material for these diamonds are elongated or thickened diamonds, and custom-cut view assumes a natural form in most cases.

   Let us take a closer look at what might be the types of diamonds, what are the differences of each. 

Large selection of diamonds and luxury jewelry. 

Round or standard diamond 

 Diamond Facets, treated by this method, play the world. Stone turns out to be weightless, light, bright, red round diamonds are probably the most common form of cut among all produced diamonds. Today, it takes more than 90 percent of the diamond market. First of all, round diamond from all other forms are standard ornamentation faces and proportions, as well as a more thorough approach to the assessment of the quality of treatment. His popularity round shape has won thanks to its optical properties as gloss, scintillation, the play of light. Another advantage of the round brilliant cut diamonds is the ability to use them more graceful type of eyeglasses that will not cover the entire luxury multifaceted brilliance of a diamond.

It is worth noting that the cost of such diamonds is highest. This is due to the fact that when processing the irretrievably lost more than half of the mass of the original diamond.

 This type of cut, as already mentioned, suggests 57 facets, sometimes — 58. The upper part of the stone is called the crown, the lower is the pavilion, the largest (a kind of equator) is a girdle. This crown is 33, and the Pavilion-24. Form 17-n edges is usually used to cut the smallest diamonds.

Cut the ' Princess ' 

'Princess' is the second most popular form of cut after round. This diamond cut rectangular or square with sharp corners, very good game and a high degree of return of white light to the observer. thanks to the large number of sparkling facets 'the Princess' is often used for single insertions in rings, earrings and pendants. Choosing a frame for 'Princess' has to pay special attention to the protection of the acute angles of a diamond is the most fragile elements of the cut. This treatment makes the light inside the product playand the edges of the diamond is beautiful shimmer.

That the effect was best accounted for significantly increasing Pavilion. However, the 'Princess' of the brightness can be compared with the round shape of the cut, because it was designed that way to move away from the stereotype that square gem should be Dim and the edges of the diamond when it is faded.

Cut the ' Marquis ' 

 'Marquis' is the type of cut, giving the diamond shape of the boat. this diamond is popular among women, who are often at dinner parties, are strict and yet graceful flowing dresses as the legend says, this kind of cut diamonds was invented during the time of Louis XIV, the King wanted to marry Awning de Pompadour and ordered to produce brilliant, which resembled a smile sweetheart. Marquis-cut diamond with tapered oval angled ends, resembling the shape of a boat. Marquis cut creates the illusion of a larger stone, that allows you to visually enlarge the weight of a diamond. And the oblong shape of the diamond, drew attention to the toes, visually, making them longer and thinner. 'Marquis' is often surrounded by smaller diamonds and teardrop-shaped, smoothed connecting its wedge-shaped ends.

Cut the ' Emerald ' 

 « Emerald » — stepped rectangular or square cut with truncated corners with octagonal outline. Most attractive such a cut due to wider and bright flashes of light that it gives stone. looks good in the rings, in a single copy and framed by smaller stones that form shapes suitable for a refined and elegant ESP. Emerald-cut diamonds Form demanding to the quality of the stone, because of his 'openness' of any defect of the stone will become notable immediately, even with the naked eye. 'Emerald Cut' is not required to compared with the other, so the price is not so high, although in recent years there has been a persistent tendency to increase its popularity.

Cut the 'Radiant' 

 'Radiant' (which means 'blinding') is a wedge cut precious stones, rectangular or square shaped with octagonal outline. A kind of symbiosis cuts 'Princess' and 'Emerald', 'Radiant' is known for a good game and a high degree of return of white light to the observer. especially attractive this cut looks great when handling large stone Through beveled corners 'Radiant' is easy to establish, and less prone to chipping. Most popular among men.

Cut the ' heart ' 

 Cut Diamond 'heart' is the most romantic form of cut gems on the structure strongly resembles cut pear. In fact, they are almost equally. Difference is itself a form of diamonds — it is not round, as in the case of cut pear and heart

.When buying products with this facet, you must pay special attention to the outline of a diamond. Symmetry and clarity in this case is a very important moment, paths must have a manifest form of the heart, then only the stone 'will play at full strength. The length and width of the cut stones have mostly the same. This method makes gem diamonds by the wedge. The overall silhouette of the stone is the shape of the heart. Sparkling facets a diamond heart drive mad any Lady, that is why the stone is considered a symbol of love and romance.

Cut the ' Pear ' 

 Cut Diamond ' Pear ' is a beautiful, graceful faceting stones with a rounded end on one side and with converging to a point on the other, its shape resembles a ' Pear ' -cut diamonds form the Center as a diamond in a ring and earrings or a pendant in the form of drops for Piriform diamonds is a good symmetry, which is a guarantee of the fact that the light will be evenly, especially at the point of constriction. The most profitable diamond PEAR looks great on large stones, but not less often used for smaller diamonds. Pear shape diamond ring attracts attention to your fingers, visually, making them longer and thinner. Brilliant ' Pear '  cut diamond and popular for being inlaid into the ring fingers of women doing visually longer. Verge of diamonds, shimmering and shining, visually make the female hand sleeker and more delicate.

Cut the ' Baguette ' 

 'Baguette' is the step-cut silhouette jewelry type diamond — a rectangle. Is this diamond and square, and in the form of a trapeze. Brink, the larger the diamond, the speakers because of their less. However, there is a cut and wants — need to very carefully evaluate the stone for damage and color saturation.

Cut the ' Asher ' 

' Asher ' is a combination of cut ' Radiant ' and ‘Emerald’ cut. The main difference between ' Asher '-its square shape. 'Asher' allows the owner to look elegant and majestic. This style of cut combines old-fashioned charm with modern technology of cut to form a dazzling brilliance.

This type of cut was coined by Asher from Antwerp in the year 1902. This cut the peak of popularity was in the 1930-ies, but now he is gradually returning in fashion. Due to the large open facets ' Asher ' picky about cleanliness, as even minor defects, usually hiding in the large number of facets of the diamond, when cutting ' Asher ' clearly visible. Therefore, choosing a stone of such cuts usually follow purity not less than VS2 (6). When choosing the color of a diamond shaped ' Asher ' worth considering that tint the colour groups from J (7) and below, concentrates in the corners of the diamond.

 Cut the ' Oval '

  Oval-cut diamond, a classical form of contours and the same figure as the round shape With perfect color game. 'Oval' is one of the most popular forms of fantasy. This diamond type is most suitable for large stones, for incrustation in earrings, pendants, rings, Diamond as the name implies, is oval, elongated and graceful. Enshrined in the ringIt gives the same effect as 'pear'. Facets diamond beautifully shimmer and excellent return.

Cut the ' Triangle ' 

 View-cut triangle is sometimes referred to as the 'trillions' or 'triangle.' triangle (Trilliant) is a triangular cut diamonds with this form.-cut diamonds are often referred to as trilliantami. It could be like the traditional triangular shape with sharp angles (Straight Trilliant), and a more rounded form (Curved Trilliant).

Trillianty are often used as side inserts in the rings with a big stone. Thus, treated diamonds for over thirty years. For the first time this method of cutting began to use in Amsterdam. Often diamonds, faceted trilliantom, used as the focus for Central stones that handle facet 'Princess', 'Radiant' or 'Emerald'. Usually the 'Triangle cut' implies that stone will be sharp corners, although in some cases they may be slightly rounded. There are jewelry, in which the Central stone cut by setting trilliantom.